Fagor Kore 700 Bench Top Chrome Gas Griddle NG FT-G710CL

Product features

• Natural Gas
• Stamped surface tops manufactured in 1.5 mm thick AISI-304 stainless steel.
• Laser-cut joints, automatic welding and polishing. Hidden screws.
• Rapid reaction and recovery times of the fry-top temperature.
• The fry tops are welded to the stamped surface top.
• The stamped shell and its rounded edges and corners make cleaning much easier.
• The fry top is tilted towards the front to make it easier to collect grease and liquids.
• Fitted with an opening to collect cooking grease and a tray to store it which has capacity to store up to 2 litres depending on the model.
• Optional anti-splash side and rear guards, easy to remove.
• High-temperature enamelled cast iron flue protector.
• Access to components from the front.
• Machines with IPX5 grade water protection.
• Model with smooth hot plates.
• 15 mm thick mild steel fry tops which are quick-heating and high power.
• Version with a 50-micron thick chrome surface for the three hot plate types.
• Gas-heated model with high-efficiency burners (separate burners for whole-module models).
• Model with thermostatic temperature control (between 100 and 300 °C).
• Burner ignition through electronic spark igniter. Therefore, the gas models do not need electricity for installation. With an access tube for manual ignition.
• Whole-module fry tops have two separate heating areas.
• Warranty- 2 years parts & labour warranty (+2 years extra on parts when registered with manufacturer)

Manual of Fagor Kore 700 Bench Top Chrome Gas Griddle NG FT-G710CL:

Brochure of Fagor Kore 700 Bench Top Chrome Gas Griddle NG FT-G710CL:

See our full range of Fagor Products

See Similar Products for Gas Griddles Category

Installation and Maintenance

• Due to the commercial nature of this equipment, please employ a qualified gas plumber for installation following your local council's code and obtain an Installation Compliance Certificate to signify that it has been installed safely and correctly.
• Please note that this unit can be converted to LPG by a conversion-qualified gas plumber.
• Read the product manual thoroughly before installing and operating the unit to ensure the correct instructions are followed.
• Check and ensure the gas regulator is set to Natural Gas or LPG as required.
• Verify that the gas pressure complies with the gas type being installed.